Zoom MVURA TUMBLERS
Zoom MVURA TUMBLERS
Zoom MVURA TUMBLERS
Zoom MVURA TUMBLERS
Zoom MVURA TUMBLERS

MVURA TUMBLERS

A versatile tumbler that’s an upgrade to your regular drinkware.

₹ 1,200.00

A versatile tumbler that’s an upgrade to your regular drinkware.

Craft Type:  Longpi Pottery

Longpi pottery is a treasured craft that is known for its black colour, its rustic quality and matte texture, and the feel of fired clay. Each product is painstakingly handcrafted over a long period of time. This Longpi tumbler is an exquisite reminder of the richness and earthiness of the Longpi craft.

This product is handcrafted and therefore slight variations in colours, textures and forms are inevitable and aren’t flaws.

Made in:   Delhi

Material:  Serpentine Stone

Dimensions (cm): 9.6(L) x 9.6(B) x 8.3(H); Dia: 9.6

Dimensions (inches): 3.8(L) x 3.8(B) x 3.2(H); Dia: 3.8

Weight: 580 grams

No. of pieces in a set:  2, Set Of Two Tumblers

Longpi pottery is a treasured craft that is known for its black colour, its rustic quality, matte texture, and the feel of fired clay. The Longpi products at Ikai Asai are handmade by craftspeople belonging to the Tangkhull Naga tribe in Manipur. They are from the Longpi Kajui and Longpi Khullen craft clusters in Manipur’s Ukhrul district. The major materials used to make Longpi pottery are locally found lishun lun stone powder and weathered rock clay powder. Most tools used in this process are handmade by the craftspeople themselves with locally available resources. For instance, the ‘hmaphapi’ is a long stick, made of grass and covered in net, that is used for shaping.

Based on the product being made, a ratio of these two powders is determined and worked into a clay dough. The dough is left to age for a few days, and it is then shaped entirely by hand or with a mould and left to dry under the shade, until it takes on a greenish hue. At this stage, some designs require our craftsmen to make holes for cane accents. Once formed, the clay product goes through multiple rounds of shade-drying until it is bisque-fired at a very high temperature (around 700º – 900ºC). The scalding artefact that comes out of the kiln is then rubbed with Chirona leaves and left to cool until ready.

- Wash by hand only, using a mild dishwashing soap. Dry using a soft towel or tissue. Avoid stacking pieces in the sink.
- When not in use, store in a clean and dry condition to ensure that it retains its natural finish. If it is being stacked, place tissues between products to avoid abrasion.

Craft Type:  Longpi Pottery

Longpi pottery is a treasured craft that is known for its black colour, its rustic quality and matte texture, and the feel of fired clay. Each product is painstakingly handcrafted over a long period of time. This Longpi tumbler is an exquisite reminder of the richness and earthiness of the Longpi craft.

This product is handcrafted and therefore slight variations in colours, textures and forms are inevitable and aren’t flaws.

Made in:   Delhi

Material:  Serpentine Stone

Dimensions (cm): 9.6(L) x 9.6(B) x 8.3(H); Dia: 9.6

Dimensions (inches): 3.8(L) x 3.8(B) x 3.2(H); Dia: 3.8

Weight: 580 grams

No. of pieces in a set:  2, Set Of Two Tumblers

Longpi pottery is a treasured craft that is known for its black colour, its rustic quality, matte texture, and the feel of fired clay. The Longpi products at Ikai Asai are handmade by craftspeople belonging to the Tangkhull Naga tribe in Manipur. They are from the Longpi Kajui and Longpi Khullen craft clusters in Manipur’s Ukhrul district. The major materials used to make Longpi pottery are locally found lishun lun stone powder and weathered rock clay powder. Most tools used in this process are handmade by the craftspeople themselves with locally available resources. For instance, the ‘hmaphapi’ is a long stick, made of grass and covered in net, that is used for shaping.

Based on the product being made, a ratio of these two powders is determined and worked into a clay dough. The dough is left to age for a few days, and it is then shaped entirely by hand or with a mould and left to dry under the shade, until it takes on a greenish hue. At this stage, some designs require our craftsmen to make holes for cane accents. Once formed, the clay product goes through multiple rounds of shade-drying until it is bisque-fired at a very high temperature (around 700º – 900ºC). The scalding artefact that comes out of the kiln is then rubbed with Chirona leaves and left to cool until ready.

- Wash by hand only, using a mild dishwashing soap. Dry using a soft towel or tissue. Avoid stacking pieces in the sink.
- When not in use, store in a clean and dry condition to ensure that it retains its natural finish. If it is being stacked, place tissues between products to avoid abrasion.

Manufactured at: B-50, Masudpur Vasant Kunj, Delhi -70

MVURA TUMBLERS

₹ 1,200.00

No Results found for '{{truncate(query,10)}}'

Please try different query or try clearing Filters.

DEVA

Channelling meditative energy of the pure and divine.

KNOW MORE

KAMA

Kama is life itself, chronicling India’s rich history of indulgence and an intrinsic desire to experience life with a deep, sensorial indulgence.

KNOW MORE

LILA

The nomad of Ikai Asai, Lila is inspired by folklore, nostalgia and earthy celebrations - a play between timeworn and contemporary.

KNOW MORE

JUNOON

An ode to India’s fearless, saturated, and manic intensity.

KNOW MORE
{{f.title}}
{{sortLabel}}
{{currencySymbol}}{{i.value[0]}}-{{currencySymbol}}{{i.value[1]}}
{{currencySymbol}}{{i.value[0]}}-And Above
{{i.value}}
x
Clear All
Showing {{totalHits}} Results Results for {{truncate(query,25)}}
No more results
Filter by
Sort by
  • SORT BY
Filter by Reset all
Close
Clear

{{f.title}}

Oops!!! Something Wrong Went

Please, try reloading page or go back to Home page